|
1909 Schiller upper door/balluster unit
$200.00
Upper door hinged unit with balluster frame, overall good condition with no chips. Veneer is Walnut burl. Removed from a 1909 Schiller upright, Very heavy. Shipping included in price, lower 48 states.
Add To Cart
|
|
1909 Schiller Fallboard
$75.00
Fairly nice Schiller upright fallboard. Nice burl walnut veneer. This is 3 pieces which includes all the hinges, uses a two screw mount ( one each side ) to the cheek blocks. We will be listing other parts to this same model, one which was converted to a shell. Shipping included fed ex ground lower 48 states
Add To Cart
|
|
Trap Levers/ hardware
$40.00
Trap Levers which are solid maple, as is mounting block. Normally these are in pretty bad condition but these are nice. I have 3 available. 40.00 each
Add To Cart
|
|
Piano Actions
$200.00
Need an action for a piano, we have lots of spares, this one pictured is for a 1959 Baldwin spinet. Some of these parts are no longer available ( most) All actions are pre- rebuild and for parts. Very heavy ! Shipping is extra
Add To Cart
|
|
1909 Wasle & Co Action
$200.00
Wasle Action removed from a 1909 Schiller upright, these things weigh a ton but price includes shipping. Original condition so needs rebuilt but is complete
Add To Cart
|
|
Dual wheel Casters set
$75.00
Set of hard to find original dual wheel casters, These are for antique uprights with the 4 screw hole mounting. 4 inch total height. 2.5 inch working height. 100 years old, cast iron, made in the USA. Will be bead blasted, includes 16 screws and free shipping lower 48 states USA
Add To Cart
|
|
Architectural upper door braces
$35.00
Upper door mounting ballusters which can be used for anything, Pine construction with 1/4 sawn oak veneer on 3 sides, nice design 19.25 inches tall by 4 inches deep at base, 2.25 inches at the top 1.75 inches in width, there is a Left and a Right. Free shipping Lower 48 states USA
Add To Cart
|
|
1959 Baldwin Acrosonic Cheek Blocks
$25.00
Pair of Cheek Blocks with the long screws to attach them. Fits a 1959 Baldwin Acrosonic spinet, looks like medium walnut
Add To Cart
|
|
Decorative Ballusters Pr
$60.00
solid oak columns are 3.75 inches in diameter by 18.75 inches tall and can be removed from the L brackets. Total length attached is 20.75 inches. L size is 13 by 3 inches. Veneer is quarter sawn oak while the brace and column turnings are solid oak. Nice carved leaves at top of columns.
Add To Cart
|
|
Doors
$40.00
Lower Harp Doors, various styles, plain, raised panel, framed, trimmed, carved you name it, I have it. Great for furniture projects.
Add To Cart
|
|
1936 Spinet Lyre
$40.00
Vintage older style Spinet Lyre( not grand type) with solid brass pedals, no pedal rods. Good to build a lamp out of or ? Solid walnut or mahogany.
Add To Cart
|
|
Thumb screws
$5.00
Sold by the pair when available, solid nickel plated steel or nickel plated brass action hold down thumb screws. Let me know what size you are looking for before ordering.
Add To Cart
|
|
Piano Trucks
$40.00
Piano stage trucks. These fit studio/spinet type pianos, bolt on. If you have to move a piano around from room to room without scratching the floor or jarring the tuning. This is what you want to use. 40.00 a pair plus any applicable shipping.
Add To Cart
|
|
Hammond L-102 parts
$5.00
This little hammond was restored and working before being damaged by about 10 inches of water. The keys and some of the parts are really nice. We are parting it out. Prices start at 5.00 The top cover and music rack are mint. So if you need something email me.
Add To Cart
|
|
Hammond E 112 for parts
$5.00
5.00 and up or will sell it as a complete unit. Supposedly it was a working organ recently until it just stopped. I do not work on organs so I do not know what is wrong with it.
I have the pedals and original bench as well
Add To Cart
|
